This page records the OpenHPL components on which the analytical notes are based. It keeps the derivations traceable to the library rather than to a generic textbook model.
Repository: OpenSimHub/OpenHPL. The current README describes OpenHPL as an open-source Modelica hydropower library with hydraulic components, turbine and generator models, power-system integration, controllers, and elastic-penstock models.
OpenHPL/Waterway/Reservoir.mo — reservoir level, hydrostatic outlet pressure, optional inflow and dynamic mass/momentum balance.OpenHPL/Waterway/Pipe.mo — conduit model.OpenHPL/Waterway/PenstockKP.mo — recommended elastic/compressible penstock with Kurganov–Petrova central-upwind discretization.OpenHPL/Waterway/SurgeTank.mo — surge-tank storage and momentum behavior with several variants.OpenHPL/Waterway/DraftTube.mo — draft-tube hydraulic model.OpenHPL/ElectroMech/Turbines/Francis.mo — detailed Francis turbine with guide-vane geometry, Euler power terms and losses.OpenHPL/ElectroMech/Turbines/Turbine.mo — simpler turbine representation.OpenHPL/ElectroMech/Generators/SimpleGen.mo — rotational-energy generator model.OpenHPL/ElectroMech/Generators/SynchGen.mo — synchronous generator model.OpenHPL/ElectroMech/PowerSystem — grid/power-system coupling, including OpenIPSL-based integration.OpenHPL/Controllers/Governor.mo — frequency and power-reference governor with permanent droop, transient droop, pilot servo, main servo, rate limiting and gate-position limiting.Whenever a reduced equation is shown in these notes, it should be understood as one of three things: (1) an equation directly represented in OpenHPL, (2) a compact analytical rewriting of the same physical balance, or (3) a reduced model derived around an operating point. The reduced FCR transfer functions are not claimed to be the native state equations of OpenHPL.